Large Volume Rotary Evaporator
The rotary evaporator is heated by water bath(oil bath) to form thin film under the negative pressure condition, evaporate highly, then condense and recycle the solvent simultaneously. The apparatus are particularly suitable for the heat-sensitivity material’s condensation, crystallization, separation, recovery and so on. And reflux extraction can be avaliable for parts evaporator models.
It is one of the necessary basic instruments in the chemical industry, pharmaceutical industry, universities and research laboratories and other units etc., while it is also the main means for producing concentrated extracts and analysis experiments.
| Send an E-mail to us! | |
Follow Us:
|
|
 ( Click this button to inquiry ) |
|
PRODUCTS
- Glass Reactor Series
- Rotary Evaporator Series
- Water Vacuum Pump Series
- High and Low Temperature Cycling
- Cooling Liquid Circulating Pump Series
- Circulating Water or Oil Bath Series
- Drying Oven
- Hydrothermal Synthesis Reactor
- Microwave Chemical Reactor
- High Pressure Reactor Series
- Short Path Distillation
- Heating Mantle
- Spray Dryer
- Solvent Recovery Machine
- Stainless Steel Reactor
- Other
- Emulsifying Mixer Machine
Whatsapp:+8615036470528
E-mail: [email protected]
Address: 19/F, Block B, Guohong Mansion, Northeast corner of the intersection of Huagong Road and Lamei Street, Hi-Tech Development Zone, Zhengzhou City, Henan Province, China
Here are the products display.
1. International advanced EL gas-tight system keeps high vacuum degree. Gas-liquid separator separator, no reflux.
2. Double condenser, collection rate over 95%. The evaporating flask is easy to install and setup.
3. Continuous feeding is available.(Inlet Value). Explosion-proof system is optional. 110V/60Hz can be customized.
4. Water bath, intelligent PID temp. cintroller, can be lifted up and down.
5. Reasonable structure, exquisite material. Mechanical parts are made of stainless steel and aluminum die casting.
6. Glass parts are made of corrosion resistance, high temperature resistance, borosilicate glass.
7. Rubber parts adopt new standard materials, easy to change for users.
8. Built-in transmission system, frequency conversion speed regulation, stable and reliable speed.
Product Parameters:
| Model | RE-1002 |
| Rotary Flask(L) | 10 |
| Collecting Flask(L) | 5 |
| Motor Power(W) | 180 |
| Static Temperature Control Range | 0-99（250）℃ |
| Rotating Speed（R/min） | 0~120 |
| Evaporation Speed(L/H2O) | >3L/h |
| Condenser Cooling Surface(m2) | 0.57 |
| Vacuum Degree | 0.098Mpa |
| Sealing Mode | PTFE Sealing System |
| Water Bath Configuration | Water bath lifting |
| Water Bath Power（kw） | 3 |
| Condenser | Vertical Double Condenser |
| Voltage | 220V50HZ |
Optional Equipments:
Circulating water vacuum pump: Used to provide a vacuum source.
Low temperature cooling liquid circulation pump: For condensation and reducing waste of materials.
